Ask a question about the product:

Name: E-mail: Phone: Question:
Ask the question
Your question has been sent. We will contact you shortly Please, fill all fields. E-Mail is not correct. An error has occurred. Please try again later.

RAKSA iDet Selective RF Detector

Buy RAKSA iDet Selective RF Detector

RAKSA iDet Selective RF Detector can be used to detect and locate in near field a wide variety of radio transmitters used for secret access to information. RAKSA iDet detects: Cellular phones of GSM 850/ 900E/ 1800/ 1900, UMTS 850/ 900/ 1800/ 1900/ 2100, CDMA 450 (A-H)/ 800/ 1900 standards Cordless DECT phones Bluetooth and Wi-Fi devices Wireless video cameras Radio transmitters with analog modulation (AM, FM, PM) Radio transmitters with digital modulation and continuous carrier...

In stock
€526.32
Your question?


RAKSA iDet Selective RF Detector can be used to detect and locate in near field a wide variety of radio transmitters used for secret access to information.

RAKSA iDet detects:

Cellular phones of GSM 850/ 900E/ 1800/ 1900, UMTS 850/ 900/ 1800/ 1900/ 2100, CDMA 450 (A-H)/ 800/ 1900 standards

Cordless DECT phones
Bluetooth and Wi-Fi devices
Wireless video cameras
Radio transmitters with analog modulation (AM, FM, PM)
Radio transmitters with digital modulation and continuous carrier (FSK, PSK, etc.)
Radio transmitters with wideband modulation up to 10 MHz bandwidth

RAKSA iDet is a superheterodyne receiver with low IF and frequency synthesizer. Scanning and analyzing cycle period is 1.0-1.5 sec. RAKSA iDet can operate within guard, sweep, search, difference search modes and monitoring of digital signals.

Competitive Advantages:

  • Selective reception of radio signals
  • High speed of scanning and analyzing
  • Detection of wideband and digital signals
  • Adaptation to the background noise in Guard Mode
  • Difference search mode
  • Audio monitoring
  • Signal frequency and level measurement
  • Alarm events log
  • Soundless alarm indication (vibration mode)
  • No need for external antenna
  • Interface languages: English, German, Spanish, Italian, French, Russian

Technical Characteristics:

Frequency band

40 - 3800 МHz

Typical sensitivity

70 mV/m

Dynamic range

50 dB

Bandwidth

10 МHz

Period of full scanning cycle

? 1.5 s

Running time in guard mode

4 - 12 h

Running time in other modes

3 h

OLED display

128 x 64

Dimensions

77 х 43 х 18 mm

Weight

35 g

Detection range of radio signal source is determined by its radiated power and sensitivity of the field indicator. In cell phones radiated power depends on the reception conditions, such as distance from the base station, location inside or outside the building, etc. and can vary significantly. The typical values and limits of detection range of radio signal sources for the RAKSA iDet field indicator are as follows:

GSM cell phone: radiated power -20 - +30 dBm, detection range 0.3 - 80 m, typical value 10 - 20 m.

UMTS cell phone: radiated power -40 - +20 dBm, detection range 0.03 - 30 m, typical value 2 - 3 m.

DECT wireless phone: radiated power -20 dBm, detection range 8 m.

Wireless microphone for secret information retrieval : radiated power 0 - +10 dBm, detection range 3 - 10 m.

The limits of the transmitter power corresponding to the dynamic range of the RAKSA iDet field indicator are as follows:

at the distance of 1 m from the transmitter 0.15 mW - 15 W

at the distance of 3 m from the transmitter 1.4 mW - 140 W

Note

Comparison of the EM field detectors of two Hunters and Raksa-120 (video)

In warehouse 10 pcs

RAKSA iDet Selective RF Detector reviews

Be the first to write a review of this product!